Dr. JAWED MUSTAFA

ASSOCIATE PROFESSOR

ASSOCIATE PROFESSOR
MECHANICAL ENGINEERING DEPARTMENT
COLLEGE OF ENGINEERING

Working as Associate Professor in Mechanical Engineering Department since December 2015. Completed Ph.D. in Mechanical Engineering from Faculty of Engineering & Technology, Department of Mechanical Engineering, Aligarh Muslim University, Aligarh in 2014. Currently teaching general course Introduction to engineering design as subject (2 GE 102).


المؤهلات العلمية

Ph.D. (2014):               Heat Transfer and Computational Fluid Dynamics
Dept. of Mechanical Engineering, ZHCET, Aligarh Muslim University, Aligarh, INDIA
Title:                          “Experimental and Numerical Analysis of Heat Transfer in a vertical Annular Thermo-siphon”

M.Tech. (2006):          Mechanical Engineering (Thermal Sciences)
Dept. of Mechanical Engineering, ZHCET, Aligarh Muslim University, Aligarh
Title:                          “Heat Transfer and Fluid flow studies on water during Natural convection in a vertical Annulus”

B.Tech. (2002):            Mechanical Engineering
Dept. of Mechanical Engineering, ZHCET, Aligarh Muslim University, Aligarh
Project Title:               "Base Pressure Control with Micro jets" at High Speed Aerodynamics Lab
Department of Aerospace Engineering, IIT Kanpur.

SSSC (1997):               P C M ( Science), AMU Board
Senior Secondary School, Aligarh Muslim University, Aligarh

10th (1994):                  Science, UP Board
Obra Inter College, Obra, Sonebhadra

الخبرات

Working as an Assistant Professor in the Department of Mechanical Engineering, College of Engineering, Najran University, Najran. Saudi Arabia. From 10 December 2015 to till now.

التخصصات والمهارات

Energy Storage, Sustaibnable Energy, Solar energy, solar still, Heat Transfer and Fluid Flow, Computational Fluid Dynamics, Numerical Modeling & Simulation, Parallel Computing, CFD with Coding, pakage software ANSYS & COMSOL Multyphysics.

الدورات التدربية

International / National Workshop:

  • Attended “One Week Faculty Development Programme on Data Science Applications in Science and Technologies” Organized by Department of Computer Sciences, BGSB University, Rajouri, J&K, INDIA, from 28 March – 1 April, 2022.
  • Attended “One Week Faculty Development Program on “Recent Advances in Heat Transfer and Combustion Engineering” Organized by Department of Mechanical Engineering, ZHCET, Aligarh Muslim University, Aligarh, INDIA, from 8 – 12 November, 2021.
  • Attended the International Virtual Conference on “Vision of Solar Energy in the Kingdom of Saudi Arabia: Applications and Challenges (VSESA 2020)” Organized Online by College of Engineering, Qassim University, Al-Qassim, SAUDIA ARABIA, from 9 – 10 December 2020.
  • Actively participated in “International Symposium on Advanced Manufacturing and Materials Engineering” Organized by Mechanical Engineering Department, NSAK College of Engineering and Technology, Hyderabad, Telangana, INDIA, from 7 -12 July 2020.
  • Participated   in   the   International   workshop   on   “Recent    Trends    in    Flow Visualization” at Dept. of Mechanical Engineering, IIT- Roorkee, Dec 29-31,2009, INDIA.

International / National Seminar and Trainings:

  • Participated in one day webinar on “Sustainable Design of HVAC Systems in Commercial Building” held at Department of Mechanical Engineering, ZHCET, Aligarh Muslim University, Aligarh, INDIA in association with ASHRAE student chapter, on 26 March 2022.
  • Participated in one day webinar on “Excellence in Peer Review: How to be an effective peer reviewer” organized by Peer Review System Webinars, Taylor & Francis reviewer Training Network, on 24 March 2022.
  • Attended one day online Webinar on “Design Optimization” organized by COMSOL DAY, COMSOL MULTIPHYSICS at 17 March, 2022.
  • Attended one day online Webinar on “Simulation in Mechanical Engineering” organized by COMSOL DAY, COMSOL MULTIPHYSICS at 16 March, 2022.
  • Participated in one day webinar on “COMSOL Day: Chemical Engineering-Main Room” organized by COMSOL Team, on 10 March 2022.
  • Attended a training program titled “Blackboard Training-Basic Level” organized by E- Learning & Distance Education Deanship at Najran University, Najran, KSA on 14 November 2019.
  • Attended a training program titled “Blackboard Training-Advanced Level” organized by E- Learning & Distance Education Deanship at Najran University, Najran, KSA on 7 March 2019.
  • Attended a training program titled “Blackboard Training-Basic Level” organized by E- Learning & Distance Education Deanship at Najran University, Najran, KSA from 14 – 15 January 2019.
  • Successfully Passed the Training Program Entitled “Performance Indicator for the Evaluation and Benchmarking of Research in University” organized by Skill Development Unit at the Deanship of Development and Quality, Najran University, Najran KSA on 10 October 2016.
  • Attended a training of “Fracta Software Training on Machine 750MP2L8766” organized by INSTRON Company England at Najran University, Najran, KSA on 16 May 2016.
  • Organized and Participated in workshop and finishing school on “Computational Fluid Dynamics”, Organized by Department of Mechanical Engineering, Z.H.C.E.T., AMU, Aligarh, INDIA, 31st August -04th September, 2013.
  • Organized and Participated in “2 n d National Conference on Advances in heat transfer and fluid dynamics”, Organized by Departmrnt of Mechanical Engineering Z.H.C.E.T., AMU, Aligarh, 23-24 March, 2013, INDIA.
  • Organized and Participated workshop on “Computational Methods in Heat and Fluid Flow (WCMIHFF)”, Organized by Department of Mechanical Engineering, Z.H.C.E.T., AMU, Aligarh, 18-19 February, 2012, INDIA.
  • Participated and chaired a session in “National Conference on Advances in Mechanical Engineering (NCAME)”, Organized by Mechanical Engineering section, University Polytechnic, AMU, Aligarh, 27-28 November, 2010, INDIA.
  • Attended   three   days   workshop   organized    on    “Parallel    Programming    using Message    Passing     Interface     &     Open-MP”     at     Mechanical     Engg.     Dept., Aligarh Muslim University in April 2012.
  • Attended seven days workshop organized on “ANSYS-14”, at Mechanical Engg. Dept., Aligarh Muslim University in Feburary, 2012.
  • One month training at Obra Thermal Power Station, Obra, Uttar Pradesh. Submitted report on "Study of Steam Generation System in Thermal Power Plant".

الأبحاث العلمية

الوصف   

  • Jawed Mustafa, Saeed Alqaed, Hikmet ? Aybar, Shahid Husain, Investigation of the effect of twisted tape turbulators on thermal-hydraulic behavior of parabolic solar collector with polymer hybrid nanofluid and exergy analysis using numerical method and ANN, Engineering Analysis with Boundary Elements, 144 (2022) 81-93.
  • Jawed Mustafa, Saeed Alqaed, Mohsen Sharifpur, Economic and thermo-hydraulic features of multiphase nanofluids in a heat exchanger equipped with novel turbulators: A numerical study, Engineering Analysis with Boundary Elements, 144 (2022) 55-66.
  • Jawed Mustafa, Saeed Alqaed, Mohsen Sharifpur, PCM embedded radiant chilled ceiling as a solution to shift the cooling peak load-focusing on solidification process acceleration, Journal of building Engineering, 57 (2022) 104894.
  • Jawed Mustafa, Saeed Alqaed, Mohsen Sharifpur, Investigation into the use of phase change materials in thermal management of a solar panel in the vicinity of tubes with slotted rectangular fins, Applied Thermal Engineering, 215 (2022) 118905.
  • Jawed Mustafa, Saeed Alqaed, Mohsen Sharifpur, Enhancing the energy and exergy performance of a photovoltaic thermal system with?-shape collector using porous metal foam, Journal of Cleaner Production, 368 (2022) 133121.
  • Jawed Mustafa, Saeed Alqaed, Mohsen Sharifpur, Mathkar A Alharthi, Combined simulation of molecular dynamics and computational fluid dynamics to predict the properties of a nanofluid flowing inside a micro-heatsink by modeling a radiator with holes on its fins, Journal of Molecular Liquids, 362 (2022) 119727.
  • Mohammad S Islam, Shahid Husain, Jawed Mustafa, Yuantong Gu, A Novel Machine Learning Prediction Model for Aerosol Transport in Upper 17-Generations of the Human Respiratory Tract, Future Internet, MDPI, 14 (2022) 247.
  • Jawed Mustafa, Shahid Husain, Uzair Ali Khan, Md Mozammil Akhtar, Prediction of diffuse solar radiation using machine learning models based on sunshine period and sky?clearness index for the humid?subtropical climate of India, Environmental Progress & Sustainable Energy, (2022)https://doi.org/10.1002/ep.13973.
  • Saeed Alqaed, Jawed Mustafa, Hikmet ? Aybar, Basharat Jamil, Mathkar A Alharthi,  Investigation of thermal entropy generation and nanofluid flow in a new heatsink with effect of nanoparticles shape, Case Studies in Thermal Engineering, 36 (2022) 102198.
  • J. Mustafa, S. Alqaed, M. Sharifpur, Evaluation of energy efficiency, visualized energy, and production of environmental pollutants of a solar flat plate collector containing hybrid nanofluid, Sustainable Energy Technologies and Assessments, 53 (2022)  102399.
  • J. Mustafa, S. Alqaed, M. Sharifpur, Shahid Husain, The effect of using multichannel twisted tape and nanofluid on the absorber tube's heat transfer and the efficiency of a linear parabolic solar collector, Sustainable Energy Technologies and Assessments, 52 (2022) 102329.
  • J. Mustafa, S. Alqaed, F.A. Al, mehmadi, M. Sharifpur, Effect of simultaneous use of water- alumina nanofluid and phase change nanomaterial in a lithium-ion battery with a specific geometry connected solar system, Journal of Power Sources, 539, (2022) 231570.
  • S. Alqaed, J. Mustafa, F.A. Almehmadi, M. Sharifpur, The effect of using non-Newtonian nanofluid on pressure drop and heat transfer in a capillary cooling system connected to a pouch lithium-ion battery connected to a solar system, Journal of Power Sources, 539, (2022) 231540.
  • S. Alqaed, J. Mustafa, M. Sharifpur, Numerical study of the placement and thickness of blocks equipped with phase change materials in a Trombe wall in a room-thermal performance prediction using ANN, Engineering Analysis with Boundary Elements, 141 (2022) 91-116.
  • J. Mustafa, S. Alqaed, M. Sharifpur, Numerical study on performance of double-fluid parabolic trough solar collector occupied with hybrid non-Newtonian nanofluids: Investigation of effects of helical absorber tube using deep learning, Engineering Analysis with Boundary Elements, 140 (2022) 562-580.
  • S. Alqaed, J. Mustafa, M. Sharifpur, Numerical investigation and optimization of natural convection and entropy generation of alumina/H2O nanofluid in a rectangular cavity in the presence of a magnetic field with artificial neural networks, Engineering Analysis with Boundary Elements, 140 (2022) 507-518.
  • S. Alqaed, J. Mustafa, M. Sharifpur, Annual energy analysis of a building equipped with CaCl2·6H2O as PCM and CaCl2·6H2O/ CsxWO3 as nano PCM – Useless of adding nanoparticles, Journal of Building Engineering, 53, (2022) 104527.
  • S. Alqaed, J. Mustafa, M. Sharifpur, G. Cheraghian, Using nanoparticles in solar collector to enhance solar-assisted hot process stream usefulness, Sustain. Energy Technol. Assessments, 52(4), (2022),101992.
  • S. Alqaed, F.A. Almehmadi, J. Mustafa, Shahid Husain, G. Cheraghian, Effect of nano phase change materials on the cooling process of a triangular lithium battery pack, J. Energy Storage, 51(9) (2022), 104326.
  • F.A. Almehmadi, S. Alqaed, J. Mustafa, B. Jamil, M. Sharifpur, G. Cheraghian, Combining an active method and a passive method in cooling lithium-ionbatteries and using the generated heat in heating a residential unit, J. Energy Storage, 49(1) (2022), 104181.
  • J. Mustafa, Numerical investigation of the effect of inlet dimensions air duct and distance of battery packs for thermal management of three lithium-ion battery packs, J. Energy Storage, 48(3), (2022), 103959.
  • J. Mustafa, S. Alqaed, F.A. Almehmadi, B. Jamil, Development and comparison of parametric models to predict global solar radiation: a case study for the southern region of Saudi Arabia, J. Therm. Anal. Calorim. (2022), https://doi.org/10.1007/s10973-022-11209-7.
  • J. Mustafa, F.A. Almehmadi, S. Alqaed, A novel study to examine dependency of indoor temperature and PCM to reduce energy consumption in buildings, J. Build. Eng., 51(6), (2022), 104249
  • S. Alqaed, J. Mustafa, F.A. Almehmadi, The effect of using phase change materials in a solar wall on the number of times of air conditioning per hour during day and night in different thicknesses of the solar wall, J. Build. Eng., 51(A), (2022), 104227.
  • J. Mustafa, Effect of inlet and outlet size, battery distance, and air inlet and outlet position on the cooling of a lithium-ion battery pack and utilizing outlet air of cooling system to heat an air handling unit, J. of Energy Storage 46(3), (2022), 103826.
  • J. Mustafa, S. Alqaed, M. Sharifpur, Incorporating nano-scale material in solar system to reduce domestic hot water energy demand, Sustain. Energy Technol. Assess., 49(3), (2022), 101735.
  • A. Amirahmad, A.M. Maglad, J. Mustafa, G. Cheraghian, Loading PCM into buildings envelope to decrease heat gain-performing transient thermal analysis on nanofluid filled solar system, Front. Energy Res. 9 (2021), 727011.
  • J. Mustafa, S. Alqaed, R. Kalbasi, Challenging of using CuO nanoparticles in a flat plate solar collector- Energy saving in a solar-assisted hot process stream, J. Taiwan Inst. Chem. Eng. 124(2), (2021), 258–265.
  • S. Alqaed, J. Mustafa, F.A. Almehmadi, Design and energy requirements of a photovoltaic- thermal powered water desalination plant for the Middle East, Int. J. Environ. Res. Public Health 18 (3) (2021), 1001.
  • J. Mustafa, S. Alqaed, M.A. Siddiqui, Thermally driven flow of water in partially heated tall vertical concentric annulus, Entropy 22 (10) (2020), 1189.
  • S. Alqaed, J. Mustafa, K.P. Hallinan, R. Elhashmi, Hybrid CHP/geothermal borehole system for multi-family building in heating dominated climates, Sustainability 12 (18) (2020), 7772.
  • J. Mustafa, M.A. Siddiqui, S.F. Anwer, Experimental and numerical analysis of heat transfer in a tall vertical concentric annular thermo-siphon at constant heat flux condition, Heat Transf. Eng. 40 (11) (2019) 896–913.
  • J. Mustafa, S. Husain, M.A. Siddiqui, Experimental studies on natural convection of water in a closed-loop vertical annulus, Experimental Heat Transfer. 30 (1) (2017) 25–45.
  • Shahid Husain, Jawed Mustafa, M. Altamush Siddiqui, “Investigation of the the effect of partial heating in internally heated vertical annulus” Int. J. of Innovative Research in Science, Engg. and Tech. (IJIRSET), (2015) DOI: 10.15680/IJIRSET.2015.0405112.

المقررات التدرسية

الوصف      
 

Introduction to Engineering Design (2 GE 102)

الوصف This course is basically to make students of Engineering familiar with the Design of Things and develop their skills: 

  • Formally Expose students to the engineering field
  • Enhance problem-solving skills in mathematics, science, and engineering
  • Develop skills in the engineering design process.
  • Grasp the values of professionalism, ethics, safety, intellectual property, environment, and human factors.
  • Introduce the design process, problem-solving skills, and practices dealing with open-ended problems
  • Enforce the skills in teamwork, group dynamics, critical thinking, planning, scheduling, and written/oral communications through the design project
  • Develop professional behavior in punctuality, time management, meeting deadlines, and professional appearance appropriate for engineering professionals.

الساعات المكتبية

الوصف

  8-9 9-10 10-11 11-12 12-1 1-2
الأحد
Sunday
Operation of Mechanical Labs
EE-118
Operation of Mechanical Labs
EE-118
Office hours
237 – E
Office hours
237 – E
Quality and Research
237 – E
Quality and Research
237 – E
الاثنين
Monday
Quality and Research
237 – E
Quality and Research
237 – E
Office hours
237 – E
Office hours
237 – E
Office hours
237 – E
Introduction to Engineering Design
(GE-102)
CE-214
الثلاثاء
Tuesday
Operation of Mechanical Labs
EE-119
Operation of Mechanical Labs
EE-119
Meeting
E-246
Meeting
E-246
Office hours
237 – E
Office hours
237 – E
الأربعاء
Wednesday
Quality and Research
237 – E
Quality and Research
237 – E
Office hours
237 – E
Office hours
237 – E
Quality and Research
237 – E
Quality and Research
237 – E
الخميس
Thursday
Operation of Mechanical Labs
EE-120
Operation of Mechanical Labs
EE-120
Office hours
237 – E
Office hours
237 – E
Quality and Research
237 – E
Quality and Research
237 – E